China High densified motlakase Laminated Wood bakeng sa bahlahisi le barekisi ba li-transformer tsa oli

High densified motlakase Laminated Wood bakeng sa oli transformer insulation Featured Image

Tlhaloso e Khutšoanyane:

Patsi ea laminated ea motlakase e sebelisoa haholo e le lisebelisoa le lisebelisoa tse tšehetsang li-transformer le lisebelisoa tsa lisebelisoa. E na le makhabane a mangata a kang matla a khoheli a itekanetseng, thepa e phahameng ea mechine, ho omisoa habonolo ha vacuum, ha ho na ts'ebetso e mpe ea ka hare ka oli ea transformer, ho sebetsa habonolo ha mochine, joalo-joalo. ho kopanya. 'Me e ka sebelisoa ka oli ea transformer ea 105 ℃ nako e telele.
Hangata batho ba sebelisa thepa ena ho etsa likotoana tsa khatello e ka holimo/tlase, maballo a lithapo, maoto le matsoho, li-spacer blocks ho li-transformer tse qoelisoang ka oli, le li-clamp tsa li-transformer tsa lisebelisoa. E ile ea nkela sebaka sa lipoleiti tsa tšepe, lipampiri tse sireletsang metsi, lipampiri tsa epoxy, epoxide e lohiloeng ka lesela la lesela la khalase libakeng tsena, 'me ea fokotsa litšenyehelo tsa thepa le boima ba li-transformer.

Re romelle lengolo-tsoibila Khoasolla joalo ka PDF

Lintlha tsa Sehlahisoa

Ho sebetsa Video

Trihope ke eng

LBH

Li-tag tsa Sehlahisoa

Lintlha ka lihlahisoa:

Insulation board e etsoa ho latela litekanyetso tsa IEC, ka lakane e le 'ngoe le ka botenya ba ho fihla ho 8 mm. Botenya bo ka atolosoa ho fihla ho 150 mm ka Transformer laminations.

Lisebelisoa tsa mapolanka a laminated ke lifate tsa boleng bo holimo tsa birch le willow. Ka mor'a ho pheha, ho khaola ka rotary, ho omisa, lifate tsena li etsoa ho li-veneers. Qetellong, li-veneers li tla kenngoa ka sekhomaretsi se khethehileng sa insulating 'me se sebetsoe tlas'a mocheso o phahameng le khatello.

Sefahleho sa Veneer Flatness(unit mm)

Tloaelehileng Botenya	Sebaka sa ntlha leha e le efe e ka holim'a sebaka se ka holimo sa veneer se khelohang boima bo bobebe bo otlolohileng 'musi
Tloaelehileng Botenya	Bolelele ba Veneer 500	Bolelele ba Veneer 1000
≤15	2.0	4.0
＞15..≤25	1.5	3.0
＞25..≤60	1.0	2.0
＞60	1.0	1.5

Ponahalo Boleng

Ntho	Range e lumelletsoeng
Ho ruruha	Ha e lumelloe
Ho petsoha
Lefito le Shoeleng
Ho kgomarela kantle ho mmele
Lesoba la kokoanyana
Bola
Tšoaetso
Ho senya	Tse 'maloa li lumelletsoe, eseng ts'ebeliso
Maikutlo
Mebala-mebala le ho phatloha
Lipache ka sq.m holim'a metsi	≤3

Ntho ea Tlhahlobo ea GB--- Pele o fana ka tlhahlobo ea feme

Ntho ea Teko		Yuniti	Standard	Mokhoa oa Teko
Matla a ho Kobeha a Emeng	Leba A	Mpa	≥65	GB/T2634-2008 Tekanyetso ea Teko
	Ho ea ho B		≥65
Modulus e otlolohileng ea ho Kobeha ea elasticity	Leba A	GPA	≥8
	Ho ea ho B		≥8
Compressibility (tlasa 20MPa)	Ho tloha ho C	%	≤3
	Mala		≥70
Matla a tšusumetso (teko ea lehlakore)	Leba A	KJ/㎡	≥13
	Ho ea ho B		≥13
Matla a ho kuta a Interlaminar		Mpa	≥8
Matla a motlakase a emeng (90℃+ 2℃)		KV/mm	≥11
Matla a motlakase a emeng (90℃+ 2℃)		KV	≥50
Boima ba ts'ebetso		g/cm³	>1.1~1.2
metsi		%	≤6
Shrinkage ka mor'a ho omisa	Leba A	%	≤0.3
	Ho ea ho B		≤0.3
	Ho leba botenya		≤3
Ho monyela ha oli		%	≥8

E fetileng: Lesale la Angle ea ho kenya Transformer

E 'ngoe: Mohloli oa Matla oa IGBT

Lehae la 5A Class Transformer le nang le tharollo e felletseng bakeng sa indasteri ea Transformer

1,Amoetsi oa sebele ea nang le lisebelisoa tse feletseng tsa ntlo

p01a

2, ASetsi sa R&D sa setsebi, se nang le tšebelisano 'moho le Univesithi ea Shandong e tsebahalang

p01b

3, Akhamphani e phahameng ea ts'ebetso e netefalitsoeng ka Melao ea Machabeng joalo ka ISO, CE, SGS le BV joalo-joalo

p01c

4, Amorekisi ea sebetsang hantle haholo, likarolo tsohle tsa bohlokoa ke lihlahisoa tsa machabeng tse kang Simens, Schneider le Mitsubishi joalo-joalo.

p01d

5, Amolekane oa khoebo ea tšepahalang, ea sebeletsoang bakeng sa ABB, TBEA, PEL, ALFANAR, ZETRAK joalo-joalo lilemong tse 17 tse fetileng.

p01e

Q1: U ka fana ka patsi e teteaneng ea boholo bofe?

Karabo: Re ka tšehetsa boto lamination qala ho tloha botenya 8mm-70mm, The bolelele le bophara ne a ka customized ho boholo ba hao.

Q2: Joang ho netefatsa boleng?

Karabo: Boleng bo amoheloa ke setifikeiti sa naha, basebetsi ba 'maloa ba phahameng ba tlhahlobo, mofani oa thepa ea thepa o netefatsa polokeho le ts'epahalo ea ntho e' ngoe le e 'ngoe ho tloha polokelong ho fihlela thepa e felile.

Q1: Na o ka fana ka ts'ebeletso ea senotlolo bakeng sa feme e ncha ea li-transformer?

Karabo: E, re na le phihlelo e ruileng ea ho theha fektheri e ncha ea transformer.

Mme o atlehile ho thusa bareki ba Pakistan le Bangladesh ho aha feme ea li-transformer.

lehong la laminated ea motlakase