Short Description:

This Radiator Automatic Production Line was developed by absorbing the advanced technology at home and abroad. The whole production line consists of automatic de-coiler, rolling forming machine, Automatic Fins closing machine, multi-spot welder, double side seam welder, end welder, Rolling Shearing machine, end shearing machine, Leveling&Trimming Machine, Unloading Machine and related Conveying Frame etc. It can produce 520mm width (or customized), center distance of 500mm-3000mm radiators. With high automation and good forming quality, its performance has reached the level of similar advanced foreign products.

Product Detail

Machine Video

Brief Paramters of Transformer Radiator Automatic Line 

Products size : width 520mm, 480mm or customized 

Center Distance : 500-3000mm or customized

Center Distance error: ±0.5mm

Single fin Tolerance pressure: positive pressure ≥0.15Mpa,Negative pressure ≥133Kpa,without deformation

Single oil groove thickness: Thickness 1.0≥11mm, 1.2≥11.5mm

Spot welding q’ty: width 520mm: 6 numbers; Width 480mm and 310mm: 3 numbers. 

Workpiece Material: High quality Cold rolled coil ST12, SPCC,DC01,Thickness 1.0mm - 1.2mm 

Material width:

Product width 535mm – material width 545mm;

Product width 520mm – material width 530mm

Product width 480mm – material width 490mm

Product width 460mm – material width 470mm

Product width 310mm – material width 320mm 

The movement of equipment is controlled by programmable logic controller (PLC), and the process length of each part of the workpiece is controlled by the encoder. PLC simultaneously controls press machine and uncoiler equipment. You simply need to touch the screen to input the product parameter of width, length and quantity, then the production line can be automatically produced according to your requirements, after completing the pre-set quantity, the line will stop automatically.

Standard structure of Rolling Forming Machine has double rollers to produce one type size: 520,. The roller structure is detachable. You can roll form other width radiators only by changing a pair of rollers. (But the welding units of the production line may have to change)

  • Previous:
  • Next:

  • Write your message here and send it to us